| |
| |
 |
| |
|
|
CJO625、CJO625KCJO625E型台式仪表车床
该小型机床造型新颖，操作方便，节能效果好，能车削外园端面， 钻孔以及常用公英制螺纹。
A、CJO62 5型机床轴孔内锥英氏四号可用两顶针车削要求较高的轴类零件。
B、CJO625K型机床主轴孔加大可车30mm左右较长棒料之特点。
C、CJO625E型机床结构简单，一杆两用，有走刀量可加大切削深度。该机床适用于电子、仪表、轻纺、五金、塑料工业零件加工的理想机床。 |
|
|
CJO625\CJO625K\CJO625E
type Instrument Lathe
The series of small machine tools have novelty
sculpt. They are convenient to handle and effective
at energy saving. They can be
used at turning, grinding, boring.
A. The CJO625
Lathe can use two Neil beds at turning accessory of good quality.
B. CJO625K Lathe— The bore of main axle is bigger. It can
turn cane about￠30mm.
C. CJO625E Lathe’s configuration
is simple. The rod of it has two kinds of use. These
Lathes can increase depth of cutting. The series of these lathes
adapt to electron, instrument, textile industry, hardware, plastic
and etc. |
 |
 |
|
CO630、CO630K、KS25型全齿轮变速仪表车床
|
A、CO630型机床是全齿轮变速，能达到通用车床之性能和特点，车削外径与螺纹，能双杆分开。
B、CO630K 型机床主轴孔加 大可车削外圆、内孔、端面螺纹，还可车削30mm左右较长的棒料。
C、KS25 型高速精密机床噪音低、速度高，车削物件效率高，适应生产流水线作业。此三种车床都适用于五金 、轻纺、
塑料、仪表、电器等行业的金属切削，是理想的机床。 |
|
|
CO630,
CO630K, KS25 type Instrument Lathe of Shift Gears
|
A. CO630 Lathe is an instrument
lathe of shift gears and has all characters
and capabilities of currency lathes. The lathe can be
used at turning external diameter, screw thread and dividing
two rods.
B. The bore of CO630 lathe’s
axle is bigger. It can be used at turning, boring and grinding
screw thread. It can also be used at turning longer canes
about ￠30mm.
C. KS25 Machine Tool—high speed / exact
The noise of this machine tool
is lower, while the speed of
it is high. It’s smore efficient better and adapt to pipelining.
These three types of lathe adapt to hardware,
textile industry, plastic, instrument and etc.
|
|
|
|
|
6.3吨-10吨开式双柱可倾压力机
该机身是用高强度铸铁制造，采用无转链离合器，可根据工作需要调整为单次或连续行程，使用带式凸轮摩擦制动器来克服曲轴和滑块等运动部分的惯性，滑块带有压塌式保险器，当压力机超载时，保险器会被压塌，从而保证了整台机器不受损坏。该机的本身可以倾斜，以便冲压成品或废料，从模具上滑下，如装置自动送料机构，则可进行半自动的冲压工作。
该机适用于剪切、冲孔、落料、弯曲和浅拉伸等冷冲压工作。对仪表业、电气制造业、五金制造、农业机械和汽车制造生物很适用。
|
|
6.3/10
ton Drag Machine—double columns
The machine is made
of cast iron and non-chain clutch. It can be adjusted to once or
continuous loop according to demand of work. The
lathe use arrester of strip cam to conquer inertia of crank
shift and slide. The slide has a safe of
pressure. The safe will be destroyed
when over loading, so that the machine is protected.
The body of these machines can
be inclined so that the goods or wasters
can slide from model . It can
be used at pressing of
semi-automatic if it has automatic
set of deliver materials.
These
machines adapt to pressure of cutting, boring, bend and etc. It
can also be used at instrument, electricity, hardware, agriculture
and manufacture.
|
|
|
